Konica Minolta bizhub PRESS C8000e - Manual (Page 161)

Chapter 8: Application About the network setting (Fiery controller)
8-11
1
2
3
4
5
7
9
8
10
6
Application
TCP/IP Setting
To enable TCP/IP setting is necessary to use the Network Printer function and the Network
Scanner function.
2.
On the displayed dialog box, select user name and enter
password.
3.
Click [OK].
• Configure is started.
1.
Start Configure. p. 8-10
2.
Select [Network] - [Protocol] - [TCP/IP] - [Ethernet].
3.
From [Select IPv4 Address], select [automatically] or [man-
ually].
• If [automatically] is
selected: Go to Step 4
[Next Page]
• If [manually] is selected:
Go to Step 5
[Next Page]