Konica Minolta bizhub PRESS C8000e - Manual (Page 132)

Perfect Binding Function Chapter 5: Print Operation (XPS)
5-18
Cover Print 3 in 1
After cutting and pasting automatically the first page of the original on the front cover, the last
page but one (n - 1 page) on the back cover, and the last page (n page) on 3 in 1 as the spine,
the front cover is printed.
And the second page up to the last page but two (n - 2 page) are printed as the body of doc-
uments.
The width you set in the printer driver is reflected to the spine width. The setting can range
between 1 to 30 mm in increments of 0.1 mm.
Ex.: Using [Cover Print 3in1] for the perfect binding
• The use of [PI Tray] and [PB Cover Tray] is not available for [Cover Print 3in1].
Cover Tray
Select the cover tray.
Cover Size
Set the cover size.
Cover Duplex
Check it when you want to make the cover of Perfect Binding double-sided.
Cover Trimming
Check it when you cut out the cover of Perfect Binding.
Spine Width
Set the width of a spine.
Combination Examples
It is convenient to use Perfect Binding function in combination with the following functions:
• Perfect Binding + Image Shift (Refer to p.xviii)
• Perfect Binding + Stamp (Refer to p.xviii)
Cover Print 3in1 (Both sides)
n-
3