Register/delete paper settings as a paper profile, Ofile (p. 1-29), En. -> refer to p. 1-29 – Konica Minolta bizhub PRESS C8000e User Manual
Page 51
Chapter 1: Preparation for Use
Paper Setting
1-29
1
3
4
5
7
9
8
10
6
Preparation for Use
• When “Plain” or “Fine” is applied to the tray as paper type, the default value of [Humidifier
Setting] is [ON]. In case of “Specified Color” or “Coated”, it is [OFF]. If the paper type is
changed, these values will be applied but you can change it. However, in case of “Speci-
fied Color” or “Coated” of 135 g/m
2
or less, it becomes unavailable and you cannot
change it.
• The Curl Adjustment can also be made in Paper Setting provided for the Utility Menu
screen. As the Paper Setting on the Utility Menu screen does not specify a tray, the Curl
Adjustment operates on paper.
Register/Delete Paper Settings as a Paper Profile
In the Paper Setting accessed by pressing [Paper Setting] on the MACHINE screen or COPY
screen, specified paper settings should be assigned to a tray. In the Paper Setting provided for
the Utility Menu screen, you can register the paper settings to be assigned to a tray as a paper
profile, or delete those registered paper settings.
The paper setting data registered as paper profiles can be exported to a USB flash drive and
imported to another machine of the same model.
• If the Process Adjustment is desired for each paper, contact your service representative.
• For details of the Color Density Control, refer to Section 8 of the User’s Guide - Main
Body.
5.
Press [OK].
6.
Press [Close].
•
The MACHINE screen will be restored.
• Up to 500 entries are available for the registration of paper settings.
• When [Standard] is selected for Paper Size, a desired size should be selected from
multiple standard sizes provided.
• Setting operation for the Air Assist is not available.
• Chart Adjustment of the Both Sides Adjust is not available.
• The functionality to import paper setting data provides two modes: All Import and
Individual Import.
• When saving paper setting data from a USB flash drive to a machine as new entries,
the number of entries to be imported is the count of unused entries of the machine.
• When overwriting paper setting data of a machine with those of a USB flash drive,
they will be imported to the same paper setting numbers of the data registered on
the machine.
• The functionality to export data to a USB flash drive saves the entire paper setting
data of a machine.