Konica Minolta bizhub PRESS C8000e - Manual (Page 63)

Chapter 1: Preparation for Use Paper Setting
1-41
1
2
3
4
5
7
9
8
10
6
Preparation for Use
3.
Press [Auto].
3.
Press [Manual].
4.
Press [Print Mode].
4.
Open the air blow access
window of the tray to
change the conditions of
the air assist.
• Pull out the tray, remove the
two screws, and then open
the air blow access window.
• Return the tray to the original
position.
5.
Set the original, press
[Start] and confirm the
condition of air blowing.
5.
Press [Weak] or [Strong]
to set [Lead Edge Air Level
Setting].
6.
Press [Exit PrintMode].
6.
Press [Weak] or [Strong]
to set [Side Air Level Set-
ting].
7.
Press [OK].
7.
Set [Lead Edge Nozzle
Change].
8.
Press [OK].
8.
Set [Side Duct Up/Down].
[Next Page] [Next Page]
In case of automatic settings: In case of manual settings: