beautypg.com

Selected: go to step 4, Go to step 5 – Konica Minolta bizhub PRESS C8000e User Manual

Page 162

background image

About the network setting (Fiery controller)

Chapter 8: Application

8-12

• About the details of settings, refer to the User's Guide provided with Fiery controller.
• If you don’t want to reboot immediately, click [Cancel] after clicking [Apply]. In this case,

modified settings are saved and will be available after the next restart of the controller.

4.

From [Select Protocol],
select protocol to use.

5.

Set [IP Address] and
[Subnet Mask].

6.

When you use IPv6 addresses, click [Enable IPv6] check
box and enter the address to [IPv6 Address].

7.

From [Select Gateway address], select [automatically] or
[manually].

If [automatically] is
selected: Go to Step 4

If [manually] is selected:
Go to Step 8

8.

Set [IP Address].

9.

Click [Apply].

10.

Set the other settings as required and click [Reboot].