Konica Minolta bizhub PRESS C8000e - Manual (Page 174)

Color Centro (IC-601) Chapter 8: Application
8-24
Starting Color Centro
To start Color Centro, connect to the image controller first.
• To login, the IP address and port number of the image controller are necessary
(default of the port number: 30081). You can confirm the IP address and port num-
ber with [01 TCP/IP Setting] and [14 JSP Setting], respectively, by accessing them
from the control panel.
Reference:
• [01 TCP/IP Setting] and [14 JSP Setting] can be accessed as follows:
[03 Administrator Setting] - [Controller] - [01 Controller NIC Setting Menu]
• JSP Setting is the settings regarding the connection with a Java application
server.
• Confirm that the image controller is ready to communicate.
• Color Centro is a Java application. When the Java application is blocked by the fire-
wall, [Windows Security Alert] screen is displayed. In this case, select the option
corresponding to your network environment, and click [Allow access] to allow the
communication by Java application on your network.
1.
Select [Start] - [All Programs] - [KONICA MINOLTA] - [Color
Centro] - [KONICA MINOLTA Color Centro].
2.
Enter the IP address and port number of the image control-
ler in [Destination] and then click [OK].
Color Centro starts, and then you can use the launcher screen
•
Separate the IP address and the port number with a colon. If the IP
address is 192.168.0.1 and the port number is 30081, for example,
enter "192.168.0.1:30081".
•
In [Destination], you can also select an IP address and a port num-
ber that were entered before.
The entered value is kept even after you exit Color Centro.
•
When you have connected to an image controller already, the IP
address and the port number of the image controller are displayed
on [Current Destination].