Finisher adjustment, Finisher adjustment -9 – Konica Minolta bizhub PRESS C8000e User Manual
Page 187
Chapter 9: Troubleshooting
Finisher Adjustment
9-9
1
2
3
4
5
7
9
8
10
6
Troubleshooting
Finisher Adjustment
On the Finisher Adjustment screen accessed from the Adjustment Menu screen, adjustments can
be made for the fold, staple, and punch positions as well as trimming width options.
The adjustment items are provided for each optional device as described below.
Finisher Adjustment for Finisher FS-521
01 Staple Finisher Adjustment
01 Staple Center Position
02 Paper Width Adj. (Staple)
03 Paper Width Adj. (Straight)
04 Exit Guide Center Pos. Adj.
05 Exit Guide Paper Width Adj.
Finisher Adjustment for Folding Unit FD-503
02 Multi Folder (Punch) Adj.
01 Paper Width Adjustment
02 Punch Vertical Position Adj.
03 Multi Folder (Fold) Adj.
01 Half Fold Position Adj.
02 Tri-Fold-in Pos. Adj.
03 Tri-Fold-out Pos. Adj.
04 Double Parallel Pos. Adj.
05 Z-Fold Position Adj.
06 Gate Position Adj.
Finisher Adjustment for Large Capacity Stacker LS-506
05 Stacker Adjustment
01 Paper Width Adjustment
02 Paper Length Adjustment
Finisher Adjustment for Saddle Stitcher SD-506
06 Saddle Stitcher Pos. Adj.
01 Staple Center Position
02 Staple Paper Width Adj.
03 Staple Pitch Adjustment
04 Half-Fold Position Adj.
05 Tri-Fold Position Adj.
06 Fold Paper Width Adj.
07 Trimming Adjustment
08 Trimming Receiver Adjustment