Konica Minolta bizhub PRESS C8000e - Manual (Page 45)

Chapter 1: Preparation for Use Paper Setting
1-23
1
2
3
4
5
7
9
8
10
6
Preparation for Use
8.
Measure the length of lines for each point from [1] to [8]
printed on the chart.
• You can measure and enter the value in 0.1 mm increments.
9.
Press the number key provided for each point, and then
enter the measured value.
10.
Press [Adjustment Start].
• The Both Sides Adjust screen will be restored.
11.
Press [Back].
[Next Page]