Konica Minolta bizhub PRESS C8000e - Manual (Page 185)

Chapter 9: Troubleshooting Both Sides Adjust
9-7
1
2
3
4
5
7
9
8
10
6
Troubleshooting
Both Sides Adjust
When the gap of position of the printed images is caused between front page and back page,
adjust it by using the Both Sides Adj. function.
[Both Sides Adj.] Setting
When you use Both Sides Adj. function, [Zoom] (Vertical/Horizontal) and [Image Shift] (Up/
Down/Right/Left) can be specified to adjust.
About the front page, the printing positions against the paper can be adjusted. About the back
page, the printing positions against the front page can be adjusted.
The Both Sides Adj. function can be set in multiple methods as follows:
• Start with pressing [Paper Setting] on the MACHINE screen or COPY screen.
• Start with pressing [Both Sides] on the MACHINE screen.
• Register the Both Sides Adjust to a paper profile on the Utility Menu screen, and recall it
from [Paper Setting] on the MACHINE screen or COPY screen.
• About the details of Both Sides Adj. settings on the Change Individual Set screen, refer to
"Overview of Both Sides Adjust" (p. 1-19).