Konica Minolta bizhub PRESS C8000e - Manual (Page 30)

Set the Paper to the tray Chapter 1: Preparation for Use
1-8
Loading Paper
• Be sure that the machine is powered ON before withdrawing the tray.
• Only one tray can be withdrawn at a time.
• In case of Tray 1, 2, 3, load paper with print side face down in the tray.
• In case of Trays 4 to 9, load paper with print side face up in the tray.
• Do not load paper above the limit level of the side guides.
• Load paper to be seated under the paper control lever at the air nozzle.
• Be sure that the side guides and rear guide are securely aligned to the paper; other-
wise the machine cannot detect the correct paper size, or machine trouble may
occur.
• Do not bump the tray into the main body; otherwise machine trouble may be caused
for an unexpected impact from the weight of the tray or paper.
Trays 1 to 3 Trays 4 to 9
1.
Withdraw the tray to be sup-
plied with paper.
1.
Withdraw the tray to be sup-
plied with paper.
2.
Open the feed roller.
2.
Widen the guides.
[Next Page]
• Turn the two guide fixing knobs
counterclockwise to loosen
them.
• Fully widen the side guides and
rear guide.
3.
Place paper on the tray.
[Next Page]
1
2