Konica Minolta bizhub PRESS C8000e - Manual (Page 64)

IC-601 5-24
5.2 Windows Vista/Server 2008/7 5
Updating the driver after connecting this machine
In Windows 7, if this machine is connected without first installing the printer driver, the printer driver will not
be correctly identified. In this case, the driver must be updated using [Update Driver ...].
1
Click [Start] and then [Devices and Printers].
2
Right-click the device name of the machine that is under [Unspecified] and then click [Properties].
% If [Unknown Device] appears instead of the device name of the machine, right-click to remove the
device, and install the printer driver. To connect this machine as described in "Making the printer
driver known to the compute". For details, refer to page 5-19 or page 5-22.
3
In the [Hardware] tab, click [Properties].
4
In the [General] tab, click [Change Settings].
5
In the [Driver] tab, click [Update Driver ...].
6
In the page in which to select how to search the driver software, click [Browse my computer for driver
software anyway].
7
Click [Browse...].
8
Select a desired printer driver folder in the CD-ROM, and then click [OK].
% Select a folder according to the printer driver, operating system, and language to be used.
Available printer drivers:
PS Plug-in driver, PPD driver , XPS driver
9
Click [Next].
10
Follow the instructions on the pages that follow.
% If the [Windows Security] window for verifying the publisher appears, click [Install this driver soft-
ware anyway].
11
Click [Close].
12
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Devic-
es and Printers] window.
13
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver updating.
Reference
-
In Windows Vista/Server 2008, [Update Driver ...] is also available. In Windows Vista/Server 2008, you
can specify [Update Driver ...] by opening [Properties] for this machine that is listed in [Other devices]
under [Device Manager].
To select [Device Manager], right-click [Computer] and then click [Properties]. Select it in the [Tasks]
pane that appears.