Konica Minolta bizhub PRESS C8000e - Manual (Page 59)

IC-601 5-19
5.2 Windows Vista/Server 2008/7 5
5.2.3 For network connection (Web service print)
In Windows Vista/Server 2008/7, printers supporting the Web service print function on the network can be
located and installed.
d
Reference
To install a different printer driver in the computer where one has already been installed, you must uninstall
the whole package of the currently installed printer driver. For details, refer to page 8-3.
Settings of this machine
To use the Web service print, you must configure the network settings for the machine in advance.
d
Reference
For details on the network settings of this machine, refer to "User's Guide POD Administrator's Reference"
or "User's Guide Main Body".
Making the printer driver known from the Network window
To use Web service print in Windows Vista/Server 2008/7, install the printer driver before making it known to
the computer with plug and play.
0 Installing the driver to Windows Vista/Server 2008/7-based computers requires the administrator au-
thority.
1
Install the printer driver for this machine.
% Install the printer driver using the installer or Add Printer Wizard.
The printer driver can be installed in any port.
For details, refer to page 4-5 or page 5-11.
2
Turn on the power of the machine while it is connected to the network.
Since the printer is searched for, be sure to connect the machine to the network.
3
To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing
Center] - [Change advanced sharing settings] on the computer.
4
Open the [Network] window.
% In Windows Vista/Server 2008, click [Start], and [Network].
% In Windows 7, open [Computer] and click [Network].
If [Network] is not displayed in [Computer], click the [Network and Internet] category on the [control
panel], and also click [View network computers and devices].
Connected computers and devices are detected.
5
Right click the device name and select [Install].
% To check the device name, select [Controller NIC Setting Menu] - [Web Service Settings] - [Printer
Settings] in [Administrator Settings] of this machine. In the default setting, the last six characters of
[printer name] correspond to the low-order three bytes of the MAC address.
To check the MAC address, select [Configuration Page]. For details on how to output [Configuration
Page], refer to page 14-4.
The printer driver for this machine is detected and the machine is ready to print.
6
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Devic-
es and Printers] or [Printers] window.
Reference
-
If the printer driver is not correctly installed, the driver must be updated using [Update Driver ...]. For
details, refer to page 5-24.
Items to be configured Description
IP Address In [TCP/IP Settings] of this machine, specify the IP address.
Web Service Settings In [Web Service Settings] for the machine, enable the print function.