Konica Minolta bizhub PRESS C8000e - Manual (Page 230)

IC-601 17-2
17.1 Cannot print 17
17 Troubleshooting
17.1 Cannot print
This section describes how to solve issues and problems that you may encounter while using the printer.
If you cannot print even when you have completed the printing procedure, check the following items in order
from beginning to end.
Problem Possible Cause Remedy
A message saying "Printer is not
connected" or "Print Error" ap-
pears on the computer screen. The printer driver specified
when printing may not be sup-
ported by the image controller. Check the specified printer name.
The network or USB cable may
be disconnected. Check that the cable is correctly
connected.
An error may have occurred on
this machine. Check the control panel of this
machine.
Memory may be insufficient. Perform a test printing to check
whether printing is possible.
A postscript error appears on
the computer screen. Memory of the computer may
be insufficient. Perform a test printing to check
whether printing is possible.
There may be an error in the ap-
plication software settings. Refer to the user's manual of the
application software to check the
settings.
The file printing settings may be
incorrect. Change the settings and try to
print again.
Print processing on the comput-
er finished, but printing does not
start. The printer driver specified
when printing may not be sup-
ported by the image controller. Check the specified printer name.
The network or USB cable may
be disconnected. Check that the cable is correctly
connected.
An error may have occurred on
this machine. Check the control panel of this
machine.
Unprocessed jobs may remain
on this machine and be waiting
to be processed. Check the processing order for
the job using Job List on the con-
trol panel of this machine.
When executing the print job,
[Save] may have been specified. Check from the control panel of
this machine whether the job is on
hold in the [Hold Job] in the [JOB
LIST] tab.
[Secure Print Only] may be
specified on the machine. Use [Secure Print] when execut-
ing the print job.
When the account track is ena-
bled, you may have entered an
unregistered account track
code or password. Enter the correct account track
code and password.
When the user authentication is
enabled, you may have entered
an unregistered user name or
password. Enter the correct user name or
password.
Memory of the computer may
be insufficient. Perform a test printing to check
whether printing is possible.