Konica Minolta bizhub PRESS C8000e - Manual (Page 34)

IC-601 4-4
4.2 Easy installation procedure using the installer 4
4.2 Easy installation procedure using the installer
4.2.1 Settings of this machine
Before you can use this machine through the network connection, you must configure the network settings
for this machine.
d
Reference
You can set the network settings for this machine in the screen that is displayed by selecting [Utility/Counter]
- [Administrator Setting] - [Controller] - [Controller NIC Setting Menu].
For details, refer to "User's Guide POD Administrator's Reference" or "User's Guide Main Body".
TCP/IP settings for the machine
In [TCP/IP Settings] of this machine, specify the IP address.
d
Reference
When this machine is connected through the network, you must previously specify the IP address on this
machine so that it can be detected automatically. For details, refer to [User's Guide POD Administrator's Ref-
erence] or "User's Guide Main Body".
RAW port number/IPP setting for the machine
Change the network settings for this machine according to the connection method or protocol.
-
Port9100: In [TCP/IP Settings], enable the RAW port number (initial setting: [9100]).
- IPP/IPPS: In [HTTP Server Setting], enable IPP printing.
d
Reference
For details on the TCP/IP Settings and IPP Settings of this machine, refer to "User's Guide POD Administra-
tor's Reference" or "User's Guide Main Body".
Before you can use IPPS printing, you must register a certificate with this machine. You can use the self-
signed certificate that is preinstalled in this machine. For details, refer to "User's Guide POD Administrator's
Reference" or "User's Guide Main Body".