Konica Minolta bizhub PRESS C8000e User Manual

Page 142

IC-601

11-9

11.3

Parameter details

[PI Front Cover
Tray]

Off, Tray 1-2

Set this to print a front cover on paper
that is different with the output paper,
such as thick paper.

[PI Back Cover
Tray]

Off, Tray 1-2

Set this to print a back cover on paper
that is different with the output paper,
such as thick paper.

[Perfect Binding
Setting]

[Off], [Cover Blank], [Cover Print
1in1], [Cover Print 2in1], [Cover Print
3in1]

Set this when using a perfect binder func-
tion.

[Perfect Binding
Glossy]

Off, On

Set this when printing a cover in glossy
mode for a perfect binder.
C8000 does not support Glossy Mode.

[Perfect Binding
Cover Tray]

Off, Tray 1-5, PI Tray 1-2, PB Cover
Tray, Bypass Tray
For C8000,

Off, Tray 1-9, PI Tray 1-2, PB Cover
Tray

You can set a cover tray for a perfect
binder.

[Perfect Binding
Cover Duplex]

Off, On

Set this when printing a duplex cover for
a perfect binder.

[Perfect Binding
Cover Trim]

Off, On

Set this when trimming a cover for a per-
fect binder.

[Print Mode]

[Print], [Spool], [Hold], [Print and
Hold], Form

Select a print method.
When [Print] is selected, the print job is
printed without it being stored in a hard
disk.
When [Spool] is selected, the print job is
stored in the hard disk in the main body
temporarily, and then printed.
It can prevent the intermittent printing
that may be observed when print a job
with a lot of pictures, etc.
Refer to page 13-7 for more detailed in-
formation on [Hold], [Print and Hold].

[Holding HDD]

[Main Body], [Image Controller]

If you selected [Hold] or [Print and Hold] in
[Print Mode], select either of the HDD as
destination. For details, refer to
page 13-7.

[Output Color]

[Auto Color], [Full Color], [Gray Scale]

Select the output color.

[Outline Settings]

[Off], [Text/Graphics], [Text/Graph-
ics/Image]

Select outline settings.

[Thinning]

Off, On

Select this check box to set thinning. It
can prevent a small character becoming
unreadable.

[Smoothing]

Off, On

Select this check box to set smoothing.
[Smoothing] is available only when
[600dpi] and [Thinning] are selected.

[Emphasis]

Off, On

Select this check box to set the outline
emphasizing function.

[Auto Trapping]

Off, On

Select this check box to set the auto trap-
ping function.

[1 Dot Line Em-
phasis]

Off, On

Select this check box to emphasis an ul-
trafine line.

[Separation Out-
put]

Off, On

Print cyan, magenta, yellow, and black
separately for each proof.

[Use CIE Color]

Off, On

Select this check box to use a CIE color
space at printing in gray scale.

[Glossy]

Off, On

Set the glossy function for the machine.
C8000 does not support [Glossy].

Function Name

Option

Description