Konica Minolta bizhub PRESS C8000e - Manual (Page 18)

IC-601 2-4
2.1 What is the image controller? 2
2.1.3 Control Panel Layout
No. Item Description
1 Keypad Enters values for various settings, including print
quantity and password.
2 Reset Restores machine to the initial settings.
3 Power LED Lights up in red when the main power switch is
turned on, then turns green when the sub power
switch is turned on.
4 Data LED Flashes while receiving print data.
5 Interrupt Stops copying/printing/scanning in progress to allow
a simple copying job.
6 Stop Ceases the machine operation; deletes the stored
memory.
7 Proof Copy Used to check the adjustments made on the Quality
Adjustment Screen.
8 Start Activates various machine operations.
9 Start LED Lights in blue when machine operation is available.
It turns orange if any operation cannot be started.
10 C (Clear) Allows change in entered numeric value.
11 Access Sets the machine to allow the operation only when a
user/account name and password are entered, if user
authentication or account track function is activated.
12 Mode Check Used to check settings of the print job in progress or
those currently made.