Konica Minolta bizhub PRESS C8000e - Manual (Page 130)

IC-601 10-23
10.3 Parameter details 10
10.3.15 [WorkFlow] tab
Function Name Option Description
[Send E-mail] [Off], [On Error], [Always] Set this to send an E-mail to a specified address after
completing a print job.
[User Authentica-
tion] [User Name], [Pass-
word], [Again] Set a user name and password to a print job if the user
authentication function is enabled in the machine.
You need to input the user name and password to print
if [User Authentication] is checked.
For details, refer to page 13-10.
[Account Track] [Account Name], [Pass-
word], [Again] Set an account name and password to a print job if the
user authentication function is enabled in the machine.
This identification information is used to track the num-
ber of printouts.
You need to input the account name and password to
print if [Account Track] is checked.
For details, refer to page 13-12.
[Print Mode] [Print], [Spool], [Hold],
[Print and Hold], [Form] Select a print method.
When [Print] is selected, the print job is printed without
it being stored in a hard disk.
When [Spool] is selected, the print job is stored in the
hard disk in the main body temporarily, and then print-
ed.
It can prevent the intermittent printing that may be ob-
served when print a job with a lot of pictures, etc.
If you select [Form], you can save an image file to the
image controller and use it as a background in the
[Form] tab for this driver.
Refer to page 10-20 for more detailed information on
[From].
Refer to page 13-6 for more detailed information on
[Hold], [Print and Hold].
[Hold in] [Main Body], [Image
Controller] If you selected [Hold] or [Print and Hold] in [Print Mode],
select either of the HDD as destination. For details, re-
fer to page 13-6.
[Secure Print] [Password], [Again] Refer to page 13-2 for more detailed information on
[Secure Print].