Konica Minolta bizhub PRESS C8000e - Manual (Page 119)

IC-601 10-12
10.3 Parameter details 10
Perfect Binding
10.3.6 [Page Settings] tab
You can set paper and print settings for each page.
[PI Back Cover
Tray] Off, PI Tray 1-2 Select when printing a different type of paper, such as
thick paper, for the Back Cover.
Continuous insertion is available for up to 500 sheets
when PI Tray is selected.
Function Name Option Description
Function Name Option Description
[Cover Print
Mode] [Off], [Cover Blank],
[Cover Print 1in1], [Cover
Print 2in1], [Cover Print
3in1] Set this when using a perfect binder function.
[Glossy] Off, On Set this when printing a cover in glossy mode for a per-
fect binder.
C8000 does not support [Glossy].
[Cover Trim] Off, On Set this when trimming a cover for a perfect binder.
[Spine Width] 1.0 - 30.0 mm Set the width of a spine.
The initial setting is 10.0mm at default.
[Cover 2-Sided] Off, On Set this when setting a duplex cover for a perfect bind-
er.
[Cover Tray] Off, Tray 1-5, PI Tray 1-2,
PB Cover Tray, Bypass
Tray
For C8000, Off, Tray 1-9,
PI Tray 1-2, PB Cover
Tray You can set a cover tray for a perfect binder.
[Cover Size] - Set the cover size.
Click [Custom Size] to set a custom size for the cover.
[Paper Profile] - Set a paper profile.