Konica Minolta bizhub PRESS C8000e - Manual (Page 114)

IC-601 10-7
10.3 Parameter details 10
Reference
-
The maximum possible setting in [Custom Size] is "330 x 1200 mm". However, at the factory default
setting, the maximum sheet size is "330 x 487 mm". If you wish to specify a long size for banner printing,
contact your service representative.
C8000 cannot print banner printing size.
10.3.3 [Finishing] tab
[Creep Adjust-
ment] 0 to 50 mm Set this to adjust the page position if the outer and inner
pages do not match at folding using the imposition
function.
[Booklet Splitting] - Input a number of pages to split a booklet.
It inserts a blank page automatically if the value for
[Booklet Splitting] is not a multiple of 4.
[Combination] [2-in-1], [4-in-1], [6-in-1],
[8-in-1], [9-in-1], [16-in-1] Combine more than one pages onto one sheet of paper
for printing.
[Original Size] The paper sizes regis-
tered as the standard pa-
per sizes and custom
sizes Select the paper size of the original.
[Custom Size] Specifies or registers the size.
[Original Orienta-
tion] [Portrait], [Landscape] Select the orientation for the original.
[Paper Size] The paper sizes regis-
tered as the standard pa-
per sizes and custom
sizes Set a paper size.
[Fit to Paper Size] Off, On Set this to print an original fitting to paper if their sizes
are different.
[Zoom] 1 to 1000% Select an enlarge or reduce ratio.
[Full Bleed] Off, On Prints in the original image without blank borders.
[180º Rotate] Off, On Select this check box to rotate the document 180 to
print.
Function Name Option Description