Konica Minolta bizhub PRESS C8000e - Manual (Page 195)

IC-601 14-11
14.1 Controller Machine Setting 14
Driver Print Setting - Perfect Bind Spine Width
This screen is displayed if you select [Driver Print Setting] - [Perfect Bind Spine Width] in the [Controller Ma-
chine Setting Menu] screen. For detailed information on how to open the [Controller Machine Setting Menu]
screen, refer to page 14-2.
Spool Print Jobs in HDD before RIP
This screen is displayed if you select [Spool Print Jobs in HDD before RIP] in the [Controller Machine Setting
Menu] screen. For detailed information on how to open the [Controller Machine Setting Menu] screen, refer
to page 14-2.
NOTICE
After the change, turn OFF/On the sub power switch to fix the setting.
Item Description
[Spine Width (1.0-30.0mm)] Set the width of a spine. This setting is effective only when us-
ing the PPD driver for output.
•
It can be set from 1.0 mm to 30.0 mm.
Item Description
[Job Spool Setting] Specify a job spool setting.
•
You can select [Auto], [Enable], or [Disable].