Konica Minolta bizhub PRESS C8000e - Manual (Page 123)

IC-601 10-16
10.3 Parameter details 10
10.3.9 [Color Mode] tab
Function Name Option Description
[Output Color] [Auto Color], [Full Color],
[Gray Scale] Select the output color.
[2-Color Printing] [Color 1], [Color 2] Specify when printing with 2 spot colors.
Assign spot colors for [Color 1] and [Color 2] by select-
ing proof from [Cyan], [Magenta], [Yellow] and [Black].
Specify spot color name from [Spot Color Table Name],
[Spot Color Name].
Spot color can be created and managed by the auxilia-
ry application "Color Centro". For details, refer to "IC-
601 User's Guide Color Centro".
[Separation Out-
put] Off, On Print cyan, magenta, yellow, and black separately for
each proof.
[Color Bar] [Off], [Left], [Top], [Right],
[Bottom] Specify a print position for [Color Bar].
[Color Settings In-
formation] [Off], [Left], [Top], [Right],
[Bottom] Specify a print position for [Color Settings Information].
[Number of Lines] 1 - 5 Specify a number of lines for [Color Settings Informa-
tion].
[Print Item] [Date/Time] Select this check box to print [Date/Time] for [Color
Settings Information].
[Job Name] Select this check box to print [Job Name] for [Color
Settings Information].
[User Name] Select this check box to print [User Name] for [Color
Settings Information].
[Calibration Date/Time] Select this check box to print [Calibration Date/Time]
for [Color Settings Information].
[Printer Name] Select this check box to print [Printer Name] for [Color
Settings Information].
[Model Name] Select this check box to print [Model Name] for [Color
Settings Information].
[ROM Version] Select this check box to print [ROM Version] for [Color
Settings Information].