RADWAG MA 200.3Y Moisture Analyzer - Manual (Page 92)

- 92 -
In order to finish the process press button. The moisture analyzer returns to
displaying the main window.
After removing the dried sample from the drying chamber, the user can start
another drying process.
Remember that immediate starting an another drying process of a sample may
result in distortion of moisture reading caused by evaporation of sample
moisture if placed in a hot drying chamber before starting the drying process.
Therefore, it is recommended to make a break between the following drying
processes, needed for cooling down the drying chamber.
18.6. Chart of drying process
A user can preview drying process during either during its progress or after its
completion by entering the .
Previewing a chart during drying process in progress.
To preview a chart during drying
process, press < Chart> soft key
in the bottom bar of the display.
The software opens a chart including
data on currently carried out process.
The chart is created on the real time of
the test course. It enables real-time
monitoring of the process.
In order to view a chart with a
different measuring unit, before
enabling a chart a user should change
active unit of moisture content
analysis, and only then enable a chart
using dedicated bottom bar soft key.