Warranty, Data included in this user manual – RADWAG MA 200.3Y Moisture Analyzer User Manual
Page 12
- 12 -
case of any problems it is recommended to contact RADWAG service or a
distributor. It must be always remembered to use the device in accordance
with this service manual and especially to follow instructions on installation
and configuration of a new device.
Use of a moisture analyzer MA 3Y series conversely to safety principles and
user manual guidelines may be hazardous to operator’s health and life. It is
obligatory to acknowledge the safety principles listed in the user manual:
- use a moisture analyzer only to determine humidity content in samples and
determine mass of a tested sample. Any other use of the moisture analyzer
may be dangerous both to the device and the user,
- before commissioning the moisture analyzer, make sure that the nominal
power of the device specified on its data plate, is compatible with the
supply in the mains to which the moisture analyzer will be plugged in,
- change of halogen lamps can only be carried out by authorized
service,
- protect moisture analyzer against contacts with liquids, it might lead to
electrocution, fire, emission of substances containing toxic or caustic
vapour, emission of explosive substances.
2.6. Warranty
Warranty does not cover the following cases:
•
Not observing the regulation listed in user manual,
•
Using the moisture analyzer conversely to its intended use,
•
Any modifications of moisture analyzer or cases when its housing is
opened (damaged protective stickers),
•
Mechanical defects and defects caused by media, liquids, water and
natural wearing off,
•
Improper placing of defects of electrical network / mains,
•
Overloading of measuring mechanism of the moisture analyzer.
2.7. Monitoring metrological parameters of the instrument
Metrological characteristics of the moisture analyzer requires periodical
inspection carried out by its operator. Inspection frequency is conditioned by
ambient conditions in which the moisture analyzer is used, types of performed
processes and accepted quality management system in an organization.
2.8. Data included in this user manual