Pulsafeeder Pulsar DLC XP RC - Manual (Page 8)

4
3. Equipment Inspection
Check all equipment for completeness against the order and for any evidence of shipping damage.
Shortages or damage must be reported within 30 days of receipt of this equipment to the freight carrier
and your PULSAFEEDER Representative.
4. Storage Instructions
The DLC-XP/RC can be successfully stored for extended periods. The key to this success is control of
temperature and humidity.
4.1 Short Term (0 - 12 months)
The DLC-XP/RC should be stored in a temperature and humidity controlled environment. It is
preferable to keep the temperature constant in the range of -18 to 60° Celsius (0 to 140° Fahrenheit).
The relative humidity should be 0 to 90% non-condensing. The adjustment knob should be rotated by
hand one full revolution every six months.
If the DLC-XP/RC is installed on the pump, it should not be removed during this period - provided the
above conditions can be applied to the pump as well. If the DLC-XP/RC is removed from the pump, it
should be stored in the same pump mounted orientation. After removal, seal the eccentric box opening
with a dust and moisture proof material. If the DLC-XP/RC was shipped in its own carton, it should be
stored in that carton.
4.2 Long Term (12 months or more)
Storage of the DLC-XP/RC for periods of longer than twelve months is not recommended. If extended
storage is un-avoidable the DLC-XP/RC should be stored in accordance with those conditions stipulated
for Short Term Storage. In addition, a porous bag of 85g (3 oz) silica gel or similar desiccant should be
placed beneath the wiring access cover. The cover should be re-installed to seal the desiccant within the
enclosure. The three conduit connections must be tightly capped.