Pulsafeeder Pulsar DLC XP RC - Manual (Page 44)

40
1. Press [MENU]. Press [UP] eleven times until the screen {MENU / SECURITY} appears.
–MENU–
SECURITY
Press [ENTER] to continue to program the Security sub-menu.
2. The type of security available appears flashing on the display.
a) If no password security protection is desired, press [ENTER] and go to step 5.
SECURITY TYPE
OFF
b) Press [UP] and the {TAMPER PROOF} option will appear. If complete tamper proof security of
all settings is required, press [ENTER] and go to step 3.
SECURITY TYPE
TAMPER PROOF
c) Press [UP] and the {CAL SETTINGS} option will appear. If security protection of the
calibration settings is desired, press [ENTER].
SECURITY TYPE
CAL SETTINGS
3. The display prompts the user to enter a four digit pin number. A line under the first digit indicates the
character to be changed. Use [UP] and [DOWN] to scroll through the numbers 0-9. Press [ENTER]
to accept the desired number. The line then moves to beneath the second digit. Continue to use the
[UP], [DOWN] and [ENTER] keys to set the four digit password.
NEW PIN #
0000
a) After the four digit PIN has been entered, the display prompts the user to confirm the new
number:
CONFIRM CHANGE?
YES
Press [ENTER] to accept the pin number and go to step 4.
b) If the pin number is not correct, press [UP] to change the display to
CONFIRM CHANGE?
NO
Press [ENTER] to reject the pin number and go to step 4. The user would have to start again at
step 1.
4. The menu display returns to the menu for security.
7.2.13 Number Format
The position of the comma and decimal point can be interchanged in the number format menu. Also,
you can change the number of significant decimal places.
1. Press [MENU] and [UP] twelve times until the display reads {-MENU- / NUMBER FORMAT}.
Press [ENTER] to continue into the decimal format sub-menu.
–MENU–
NUMBER FORMAT
2. The display shows the English numerical format of 9,999.00. Press the [UP] to change to the
European format.
e.g. 9,999.99
DECIMAL OR COMMA
Press
[UP] e.g. 9.999,99
DECIMAL OR COMMA
Press [ENTER] to accept the displayed format.