Pulsafeeder Pulsar DLC XP RC - Manual (Page 45)

41
3. The decimal position screen is displayed. Use [DOWN] to move the decimal position one place to
the left. For example, the screen displays 9.999, pressing [DOWN] causes the display to change to
0.9999. When the decimal position satisfies your needs press [ENTER] to accept.
e.g. 9.999
DECIMAL POSITION
Press
[DOWN] e.g. 0.9999
DECIMAL POSITION
4. The display returns to {-MENU- / DECIMAL FORMAT}.
7.2.14 Contrast Adjust
The DLC contrast can be adjusted to a desired setting.
1. Press [MENU]. Press [UP] thirteen times until the display reads {-MENU- / CONTRAST ADJUST}.
–MENU–
CONTRAST ADJUST
Press [ENTER] to continue in the contrast adjust sub-menu.
2. Use [UP] to darken the character on the display. Use [DOWN] to lighten the characters.
USE ARROWS TO
ADJUST CONTRAST
By going too far in either direction the screen can be extremely difficult to read. Press the opposite
arrow to correct the display.
3. Press [ENTER] to accept the desired contrast setting.
4. The display returns to the menu for Contrast Adjust.
You can adjust the contrast at any time by pressing the [MENU] and [UP] or [DOWN] arrow keys
simultaneously.
7.2.15 Serial Communications
This sub-menu is not functional with the NEMA 7 option.
7.2.16 Language
The DLC menus can be displayed in English, Spanish, French or German.
1. Press [MENU]. Press [UP] fifteen times until the {MENU / LANGUAGE} appears flashing on the
display.
–MENU–
LANGUAGE
Press [ENTER] to continue through the language sub-menu.
2. The language type appears on the display. Press [UP] to display the available languages.
LANGUAGE
ENGLISH
Press
[UP] LANGUAGE
FRANCAIS
LANGUAGE
DEUTSCH
Press
[UP] LANGUAGE
ESPANOL
When the correct language displays, press [ENTER] to activate.
3. The display returns to the menu for languages.