Pulsafeeder MPC Vector - Manual (Page 57)

51
15. Factory Default Values
Parameter Factory Set Value
Digital Input #1 INACTIVE, normally closed
Digital Input #2 INACTIVE, normally closed
Analog Input #1 INACTIVE
Analog Input #2 INACTIVE
Digital Output #1 ON/OFF indication, normally closed
Digital Output #2 AUTO/MANUAL Indication, normally closed
Digital Output #3 ALARM Indication, normally closed
Security Code Default = 0000
Language ENGLISH
MODE Local (Manual)
UNITS GPM (gallons per minute)
16. Retrieval of Setup Information
Users can access the system SETUP : INFORMATION menu, which will list the following data,
this may be helpful in troubleshooting:
Controller software revisions
Pump serial number
MPC VECTOR model number
Pump maximum flow and PulsaGuard minimum flow setpoint
Pump maximum speed and PulsaGuard minimum current setpoint
17. Special Key Press Access
In This SCREEN Press MENU and ENTER at the same time to:
MENU
ANAL OG I/O
Show calibration and RAW data for analog inputs
MENU
DIGI TAL I/ O
Feature not available
Press the MENU key to exit from any of these special screens.