Avaya CPSEE_TSP500 - Manual (Page 82)

Chapter 5 Admin Terminal Commands
Page 5-12 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
LOG
Toggles logging on and off.
TSP maintains a log file located in the log directory.
Example: /usr/home/cpstsp/cps01/log
All errors are automatically written to this file. However, you can choose to
log other information such as the events traced using the BUG command.
Naming conventions for log files are based on the day of the week. tsp00.log
through tsp06.log represents log file for Sunday through Saturday.
Logging will be automatically turned off if the size of the file exceeds the
parameter MAX_LOGSIZE in the dialing rules.
MUSIC
This command will turn Music-On-Hold on or off.
It will also allow changing the volume by changing the gain. The range is (-
54db to +16db).
The default is 0db. Setting the decibels to less than zero will lower the vol-
ume. While setting the decibels to above zero will make the audio louder.
To change the gain, you must turn Music OFF first. hen turn Music ON with
the new gain level.
Load misc Load the following:
• Dialing Rules
• ISDN Configuration
• Monitor Station Assign-
ments
load rules Load Dialing Rules
load syslog Load the syslog IP and Port
load tones
[] Load Tones
Table 5-4: Load categories.
Category Description
Caution!
Logging of trace information
can create very large log files.
Caution!
Audio will get louder as the
gain is increased.
Note:
Decibel changes are remem-
bered and will survive a
reboot.