Restarting protocols, Restarting protocols -3, Examples – Avaya CPSEE_TSP500 User Manual
Page 45
Chapter 4 Features and Enhancements
CPSEE_TSP500 User Guide
Version 4.0
Page 4-3
This document is confidential and proprietary to SER Solutions and is not for external use.
Restarting Protocols
Occasionally, it may be necessary to restart the telephony protocol on a spe-
cific trunk channel.
You can now start the protocol using the Admin Terminal “treset” command
with the –s option. If the channel is currently in use when the command is
issued, the reset will take place when the channel becomes idle.
Examples:
treset –s 23
treset –s 11 59
treset –s 1-33
treset –s all