Agentless campaign - feature, Transferring a call off of the tsp, Agentless campaign - feature -6 – Avaya CPSEE_TSP500 User Manual
Page 48: Transferring a call off of the tsp -6, Example
Chapter 4 Features and Enhancements
Page 4-6
Version 4.0
CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
Agentless Campaign - Feature
The campaign mode called “Agentless” dials on behalf of campaigns without
live agents.
Non-answered calls (busies, RNAs, etc.) are dispositioned as usual by send-
ing standard dial result messages to the Call Manager.
Transferring a Call off of the TSP
For Agentless Campaigns, the Protocol C messages M_XFER_DIAL allows
transferring a call off the TSP.
Imbedded in the syntax of this message is a trunk group identifier. It allows
the adjunct to select the Third Party Trunk Group, IVR Trunk Group, or
Default Trunk Group.
•
Third Party Trunks are those trunks assigned to the THIRD_PARTY
keyword in the Dialing Rules.
•
IVR Trunks are those trunks assigned to the IVR_TRUNKS keyword in
the Dialing Rules.
•
The Default Trunk Group selection will use whatever dialing rules are in
place to select a trunk group.
As of this writing, Enterprise Edition does not have the ability to set the
desired trunk group. Therefore, the default trunk group selection is always
used. This may not always be desirable. For instance, it may be necessary to
transfer the call over a specific set of trunks.
An interim solution has been implemented in the TSP using a temporary key-
word (TRANSFER_GROUP) that can be added to the TSP Dialing Rules.
This will allow selecting which group to use for this dial type.
The following are the only acceptable assignments:
TRANSFER_GROUP 0! Use whatever is specified in the M_XFER_DIAL
message
TRANSFER_GROUP 1! Use the IVR Trunk Goup
TRANSFER_GRPUP
2! Use the Third Party Trunk Group.
Example:
Let’s assume that The TSP already has a Third Party trunks assigned, but the
Call Center wants to route Agentless Campaign calls over trunks 241
through 280. You would add the following keywords to the Dialing Rules,
and then, stop and restart the TSP.
IVR_TRUNKS 241-280
TRANSFER_GROUP 1