Avaya CPSEE_TSP500 - Manual (Page 122)

Chapter 6 Trunk Spans and Dialing Rules
Page 6-8 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
This keyword identifies which country the CPSEE_TSP500 is located in. It
is automatically assigned by the TSP Configuratior and should not be
changed.
DEFAULT_BILLING
This keyword assigns the default “billing digits.” They are used if the Call
Manager fails to assign send them in the dial request. They are also used for
non-campaign dials.
Example:
DEFAULT_BILLING 1234
Currently the Adjunct can only assign a maximum of four “billing digits.”
The TSP500 can handle up to sixteen digits. If more than four digits are
required, the additional digits can be placed into the Dialing Rule.
Example:
“1dP2c”
In the first example, “1” plus the phone number is dialed. Then a three-second
pause occurs, followed by the DTMF digit 2, and then the assigned “billing
digits.” If no “billing digits” are assigned to the campaign associated with the
dial (or it was a non-campaign related dial), the default ”billing digits” are
used (if assigned). Remember the default “billing digits” are assigned using
the DEFAULT_BILLING keyword.
Table 6-2: Dial String Control Characters
Character Description
0 – 9, *, # Any discrete digits or the asterisk
or pound sign can be entered.
d Dial full phone number.
D Dial phone number. Strip area
code.
P Pause 3 seconds
p Pause 1 second.
T or t Look for tone. Minimum duration
is configured by the keyword
TONE_TIME. The default is 100
milliseconds.
c Send Billing Digits.
i Send International Country
Code.
n Look for silence. Not used on
TSP500.