Avaya CPSEE_TSP500 - Manual (Page 79)

Chapter 5 Admin Terminal Commands
CPSEE_TSP500 User Guide Version 4.0 Page 5-9
This document is confidential and proprietary to SER Solutions and is not for external use.
HTRUNK (ht)
Forces a Far End Hang-up condition. This command should NEVER be
used on a live system. It is intended for engineering use only.
INBOUND (inb)
This command provides control over the inbound default strategy. This com-
mand provides easy access to the options available in the Protocol B Message
BC. This command should only be used in-house.
INSTALL
This command allows dynamic setting of certain TSP features.
Entering install alone will display a list of options that can be installed.
Those of you familiar with the Call Processor, and specifically the install
command will recognize the format and method of activating the specific
items.
For those of you not familiar with this method, the specific items are turned
ON and OFF by typing install followed by a hexadecimal value that repre-
sents a bit pattern associated with the items on the screen. The MSN (Most
Significant Nibble) is toward the bottom of the screen, and the LSN (Least
Significant Nibble) is toward the top.
Install items are non-volatile. That is, they will survive a reboot or power
cycle.
The following is a list of options that can be installed: