Avaya CPSEE_TSP500 - Manual (Page 133)

Chapter 6 Trunk Spans and Dialing Rules
CPSEE_TSP500 User Guide Version 4.0 Page 6-19
This document is confidential and proprietary to SER Solutions and is not for external use.
machine. The default is 2200 milliseconds (2.2 seconds), and should not be
changed unless advised to do so by Engineering.
VOICE_ANSM_MLENGTH
This keyword specifies (in milliseconds) the minimum length of time contin-
uous voice must be detected before classifying the call to be an answering
machine. The default is 1600 milliseconds (1.6 seconds), and should not be
changed unless advised to do so by Engineering. See keyword
PAMD_METHOD.
VOICE_LEAKAGE_TIME
This keyword allows changing the noise level. The default is 81920.
VOICE_NOISE_LEVEL
This keyword allows changing the leakage time variable. The default is 8.
VOICE_SILENCE_LEVEL
This keyword specifies the maximum decibel level that is considered to be
silence. The value entered is assumed to be negative. The default is 33db, and
should not be changed unless advised to do so by Engineering.
VOICE_SILENCE_TIME
This keyword specifies (in milliseconds) the minimum length of a silence
after voice has been detected before call analysis reports that live voice has
ended. The default is 800 milliseconds, and should not be changed unless
advised to do so by Engineering.
VOICE_TIME1 and VOICE_TIME2
These keywords control the minimum voice time needed before voice
begin event is sent.
VOICE_TONE_RATIO
Caution!
This item is intended for engi-
neering use, and should not be
modified unless instructed to
by engineering.
Caution!
This item is intended for engi-
neering use, and should not be
modified unless instructed to
by engineering.
Caution!
This item is intended for engi-
neering use, and should not be
modified unless instructed to
by engineering.