Allied Telesis AT-S20 - Manual (Page 65)

5-1
&KDSWHU 8
9LUWXDO#/$1#&RQILJXUDWLRQ
This chapter introduces VLAN configuration as it applies to Allied
Telesyn’s implementation of VLANs. VLAN features are provided only
on the XL versions of the switches. The XL versions support port-
based VLANs and 802.1Q (draft 8) VLAN tagging.
0HQX1
Virtual LANs .
Figure 5-1 Virtual LANs Menu
By default, the switch has one port-based VLAN (all ports’ VLAN
assignment showing as Default VLAN) and one spanning tree
domain. In most situations, users find the defaults acceptable and do
not require further configuration; however, your network may
require assigning end stations into logical groupings, regardless of
their physical location.