Allied Telesis AT-S20 - Manual (Page 16)

Switch Default Settings
1-4
6ZLWFK#'HIDXOW#6HWWLQJV
Table 1-1 lists the switch default settings.
Table 1-1 Switch Default Settings
Settings Default
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway Address 0.0.0.0
Get community string public
Set community string private
Trap community string public
Port mirroring state Disabled
Spanning Tree Protocol Disabled
Omega Access Enabled
System Name None
Password (Omega) No password assigned
Download Password ATS20
Port Priority 128
Port Path Cost 100 (AT-3726)
Auto-negotiate, Full-duplex or Half-duplex (per port) Auto-negotiate (AT-3726XL,AT-3726,
AT-3716XL)
Half-duplex (AT-3714FXL, AT-3714F)
Spanning Tree Priority 32768
Maximum Aging Time 20 seconds
Forwarding Delay 15
Hello Time 2 seconds
Transmit Pacing/Backpressure Disabled
Bridge Identifier (STP) 32768 (bridge priority)
Port Priority (STP) 128
Port Cost (STP) 100 for 10 Mbps ports
10 for 100 Mbps ports
Domain Name None
Timeout Value 5 minutes
Default VLAN Name Default VLAN