Allied Telesis AT-S20 - Manual (Page 10)

Document Conventions
Preface-iv
❑ For generic (dumb terminal) terminal configuration:
❑ Selecting a configuration:
Omega denotes a default configuration by preceding it with a
>. For example, DEC VT100 configuration is shown to be the
terminal type in the following screen:
When directed You must
To select an option Type the first character of the option you
want and then press RETURN.
If two or more options have matching initial
characters, type enough characters for
Omega to distinguish your choice from the
other options; then press RETURN. To guide
you, the characters you must type are in
uppercase.
For example:
Mirroring configuration
MAC Address Table
If options on a list are preceded by numbers
(1:, 2:, 3:, etc.), type the number
corresponding to your choice at the prompt;
then press RETURN.
To enter information,
for example, IP
address Type the correct IP address at the prompt
and press RETURN.
To return to the
previous screen Press RETURN after making an entry.
> VT100-compatible / ANSI
Generic dumb terminal