Allied Telesis AT-S39 - Manual (Page 85)

AT-S39 Command Line Interface User’s Guide
85
SET SWITCH TRUNK
Syntax
set switch trunk=name select=macsrc|macboth
Parameters
trunk Specifies the name of the trunk. (You can enter any
alphanumeric character for the name and this
command will still work. This is extremely useful if
you forgot the name you assigned the trunk.)
select Specifies the load distribution method. Options are:
macsrc Source address (SA)
trunking.
macboth Source address /
destination address
(SA/DA) trunking. This is
the default.
Description
This command changes the load distribution method of the port trunk
on the switch. To initially create the port trunk, refer to the CREATE
SWITCH TRUNK command. To view the specifics of a trunk, refer to the
SHOW SWITCH TRUNK command.
Example
This command changes the load distribution method of the trunk to
MAC source address:
set switch trunk=a select=macsrc