Allied Telesis AT-S39 - Manual (Page 56)

Chapter 5: SNMP Community Strings and Trap Commands
56
SHOW SNMP
Syntax
show snmp
Parameters
None.
Description
This command displays the community strings for SNMP Read and Write
access on the switch. The default community string for Read access is
“public” and the default string for Write access is “private”.
This command also displays the IP addresses of management
workstations that receive traps from the switch. To add IP address of
management stations, refer to the ADD SNMP COMMUNITY TRAPHOST
command in this chapter.
Example
The following command displays the SNMP community strings.
show snmp