Allied Telesis AT-S39 - Manual (Page 13)

AT-S39 Command Line Interface User’s Guide
13
Starting a Management Session
To manage an AT-8000 Series switch using the command line
commands, you must first start a local or Telnet management session.
For instructions on how to start a management session, refer to the
AT-S39 Management Software User’s Guide.
Note
The command line interface is not supported from a web browser
management session.
Once you have started a management session, you will see the AT-S39
Main Menu. This menu includes the following option as one of its
selections:
C - Command Line Interface
Type C to display the command line prompt. The prompt will differ
depending on the management account you used to log onto the
switch. If you logged in as manager, the prompt is “Manager::$”. If you
logged in as operator, the prompt is “Operator::$”. You can now manage
the switch with the command line commands.