Set switch vlanstatus – Allied Telesis AT-S39 User Manual

Page 132

Text mode
Original mode

Chapter 13: VLAN Commands

132

SET SWITCH VLANSTATUS

Syntax

set switch vlanstatus=enable|disable

Parameters

vlanstatus

Specifies the switch’s mode. Specifying ENABLE

means the switch will support user-configured (port-
based and tagged) and multiple (801.Q compliant and
non-801.Q compliant) VLANs. Specifying DISABLE
means the switch will support the Basic switch mode.
The default is tagged and untagged VLANs. Only one
mode can be active on a switch at a time.

Description

This command configures a switch to support tagged VLAN switch
mode or the Basic switch mode.

Note

This command performs the same function as the SET SWITCH
SWITCHMODE command.

Example

The following command configures the switch to support the Basic
switch mode:

set switch vlanstatus=disable