Allied Telesis AT-S39 - Manual (Page 184)

Chapter 21: Command Reference
184
SET IP
set ip interface=1 ipaddress=IPaddress|DHCP
netmask=subnetmask
Configures the switch’s IP address and subnet mask, or activates the
DHCP and BOOTP client software.
SET IP ROUTE
set ip route ipaddress=ipaddress
Specifies the IP address of the default gateway for the switch.
SET SYSTEM
set system [name=”name”] [contact=”contact”]
[location=”location”]
Sets a switch’s name, the name of the network administrator responsible
for managing the unit, and the location of the unit.
SHOW CONFIG
show config
Displays overall information on the switch and the ports.
SHOW DHCPBOOTP
show dhcpbootp
Displays the status of the DHCP and BOOTP client software on the
switch.
SHOW IP
show ip interface=1
Displays the IP address, subnet mask, and default gateway.
SHOW IP ROUTE
show ip route
Displays the switch’s default gateway address.
SHOW SWITCH
show switch