Allied Telesis AT-S39 - Manual (Page 43)

AT-S39 Command Line Interface User’s Guide
43
SHOW SYSTEM
Syntax
show system
Parameters
None.
Description
This command displays the following information:
❑ Application software version and build date
❑ Bootloader version and build date
❑ Serial number
❑ Model name
❑ Switch’s name
❑ Name of the network administrator responsible for managing the
unit
❑ Location of the unit.
Note
For instructions on how to set this information, see the SET SYSTEM
command. For instructions on how to remove the information, see
the RESET SYSTEM command.
Example
The following command displays information about the switch:
show system