Allied Telesis AT-S39 - Manual (Page 129)

AT-S39 Command Line Interface User’s Guide
129
SET SWITCH MANAGEMENTVLAN
Syntax
set switch managementvlan=name|vid
Parameters
managementvlan Specifies the management VLAN. You can specify
the VLAN by name or VID. You can specify only one
management VLAN. The VLAN must already exist
on the switch. The default management VLAN is
Default_VLAN (VID 1).
Description
This command sets the management VLAN. The switch uses this VLAN to
watch for management packets from remote Telnet and web browser
management sessions. For background information on the function of
the management VLAN, refer to the AT-S39 Management Software
User’s Guide. To determine the current management VLAN, use the
SHOW SWITCH command.
Example
The following command sets the TechSupport VLAN as the
management VLAN:
set switch managementvlan=TechSupport