Allied Telesis AT-S39 - Manual (Page 67)

AT-S39 Command Line Interface User’s Guide
67
RESET SWITCH PORT
Syntax
reset switch port=port
Parameter
port Specifies the port to be reset. You can specify more
than one port at a time. You can specify the ports
individually (e.g., 2,3,5), as a range (e.g., 7-9), or both
(e.g., 2,5,7-9).
Description
This command resets a port. This can prove useful in situations where a
port is experiencing a problem establishing a valid connection to the
end node. The reset takes less than a second to complete. The port’s
current parameter settings are not changed by this command. This
command performs the same function as the SOFTRESET option in the
SET SWITCH PORT command.
Example
The following command resets Port 5:
reset switch port=5