Allied Telesis AT-S39 - Manual (Page 173)

AT-S39 Command Line Interface User’s Guide
173
LOAD
Syntax
load method=tftp|xmodem|remoteswitch
type=image|config|bootloader
switchnumber=switches
Parameters
method Specifies the method of the download. Options are:
tftp Indicates that the download will
use TFTP. This download method
can be used from either a local or
remote management session.
xmodem Indicates that the download will
use Xmodem. This download
method can be used from a local
management session only.
remoteswitch Indicates that the download will
be from a master switch to other
switches in an enhanced stack.
This option must be used from a
master switch and together with
the SWITCHNUMBER option.
type Specifies the file to be downloaded. Options are:
image Downloads both the AT-S39
software image and bootloader.
config Downloads a configuration file.
bootloader Downloads just the bootloader.
You can specify only one file type at a time.
switchnumber Specifies the switch in an enhanced stack to which
you want to download a new version of AT-S39
software or configuration file. This option, which
must be used with the METHOD=REMOTESWITCH
option, instructs the master switch to download its
AT-S39 software or configuration file onto the
specified switch. Switch numbers are displayed with
the SHOW REMOTELIST command. You can specify
more than one switch at a time (e.g., 1,3,4).