Allied Telesis AT-S39 - Manual (Page 143)

AT-S39 Command Line Interface User’s Guide
143
from filling up with multicast addresses,
leaving no room for dynamic or static MAC
addresses. The range is 1 to 2048
addresses. The default is 256 addresses.
routerport Specifies the port(s) on the switch
connected to a multicast router. Specifying
AUTO activates auto-detect, where the
switch automatically determines the ports
with multicast routers. Auto-detect is the
default setting.
Description
This command configures the IGMP snooping parameters.
Example
The following command activates IGMP snooping, sets the IGMP
topology to Multi-Host, and sets the timeout value to 120 seconds:
set ip igmp snoopingstatus=enable
hoststatus=multihost timeout=120