Allied Telesis AT-S39 - Manual (Page 64)

Chapter 6: Management Security Commands
64
SET SWITCH CONSOLETIMER
Syntax
set switch consoletimer=value
Parameter
consoletimer Specifies the console timer in minutes. The range is 1
to 60 minutes. The default is 10 minutes.
Description
This command sets the console timer. The management software
automatically ends a management session if it does not detect any
activity from the local or remote management station after the specified
period of time set by the console timer. This security feature can prevent
unauthorized individuals from using your management station should
you step away from your system while configuring a switch.
A new console timer takes affect the next time you start a local or remote
management session.
Example
The following command sets the console timer to 25 minutes:
set switch consoletimer=25