Allied Telesis AT-S39 - Manual (Page 21)

AT-S39 Command Line Interface User’s Guide
21
SAVE CONFIGURATION
Syntax
save configuration
Parameters
None.
Description
This command saves your changes to the switch’s flash memory for
permanent storage.
Whenever you make a change one of the operating parameters of the
switch, such as enter a new IP address or create a new VLAN, the switch
stores the change in temporary memory. It will be lost the next time you
reset or power cycle the unit.
To save your changes, you must use this command. Your changes are
saved to flash memory and are retained even when the switch is reset or
powered off.
Example
The following command saves your configuration:
save configuration