Allied Telesis AT-S39 - Manual (Page 191)

AT-S39 Command Line Interface User’s Guide
191
Spanning Tree Protocol Commands
ACTIVATE STP
activate stp
Designates STP as the active spanning tree.
DISABLE STP
disable stp
Disables STP on the switch.
ENABLE STP
enable stp
Enables STP on the switch.
RESET STP
reset stp
Returns all STP bridge and port parameters to the default settings.
SET STP
set stp [default] [priority=priority]
[hellotime=hellotime] [forwarddelay=forwarddelay]
[maxage=maxage]
Sets the STP bridge parameter settings.
SET STP PORT
set stp port=port [default]
[portcost=auto|portcost]
[portpriority=portpriority]
[fastmode=enable|disable][participate=yes|no]
Sets the STP port parameter settings.
SHOW STP
show stp [port=port]
Displays the STP parameter settings.