beautypg.com

Basic switch commands – Allied Telesis AT-S39 User Manual

Page 183

background image

AT-S39 Command Line Interface User’s Guide

183

Basic Switch Commands

DISABLE DHCPBOOTP

disable dhcpbootp

Deactivates the DHCP and BOOTP client software on the switch.

ENABLE DHCPBOOTP

enable dhcpbootp

Activates the DHCP and BOOTP client software on the switch.

PING

ping ipaddress

Instructs the switch to ping an end node.

PURGE IP

purge ip [ipaddress] [netmask] [route]

Returns a switch’s IP address, subnet mask, or default gateway address
to its default value.

RESET IP

reset ip interface=1

Returns a switch’s IP address, subnet mask, and gateway address to the
default values.

RESET SYSTEM

reset system [name] [contact] [location]

Deletes a switch’s name, the name of the network administrator
responsible for managing the unit, and the location of the unit.

RESTART REBOOT

restart reboot

Returns the switch’s operating parameters to the default settings.

RESTART SWITCH

restart switch

Resets the switch.